Quality Services and Sealcoating is the provider of asphalt service and pavement maintenance in the Tri-State. We offer a complete range of services from patching to sealcoating to color striping. We stand by our work and offer warranties and service contracts. We are dedicated to servicing our clients.
Quality Services and Sealcoating is your local source for all your asphalt and driveway services. We have the experience to protect your asphalt asset and help keep your driveway and commercial areas looking their best.
We are locally owned and operated, and already servicing commercial and residential customers in the Tri-State area. We are able to offer the best value and most personalized seal-coating programs to fit your needs and budget.
Welcome to Quality Services and Sealcoating
Benefits of Sealcoating
When covered with a dark black sealant, pavement looks and wears like new. Parking lot sealcoating helps to project a positive image of the company, facility, or residential complex.
Slows oxidation and water penetration
Sealcoating fills surface voids, which reduces exposure to oxygen and UV rays and reduces the depth to which oil or gas can penetrate the pavement.
Sealcoating acts as a waterproofing agent, minimizing the rate at which water enters pavement. Without it, water can permeate more freely resulting in freeze/thaw expansion and contraction of the pavement.
Resists oil and gas spills
Gasoline dripping from a topped-off fuel tank during hot weather can soften and break down unsealed asphalt pavements. Coal tars used in sealcoat are impervious to gas and oil spills.
Easier to clean and maintain
Sealcoats fill surface voids while coating the pavement surface. The resulting smooth and even texture makes the surface easier to maintain year-round. For example, snow is easier to remove from a smooth surface, and sweeping is far more effective on a smooth surface.
Increases pavement flexibility
Sealcoat brings a dark black color to the pavement. The blacker it is, the more heat a pavement draws from the sun. And, the hotter it gets, the more pliable it becomes, which helps it to withstand traffic without cracking.
Protects asphalt from pressure washing
Restaurant parking lots often extend to areas near dumpsters, where food-processing machines are pressure washed. Food waste near the dumpsters may also need to be washed away if it can’t be swept away. Sealcoating protects asphalt cement from the high-volume water pressure and detergents used in pressure washing.
The price of asphalt will always be affected by crude oil prices, which fluctuate when supplies vary. Sealcoating preserves asphalt for pennies per square foot.
Preparation and Application
Prior to pavement sealing, any structural failures or cracks on the pavement must be repaired. All potholes must be removed and replaced, cracks must be cleaned and filled, and oil spots cleaned or primed.
Once the pavement is ready, the application can proceed as outlined in our specification sheet, which is available for download in our Sealcoating Technical Specs library.
Sealcoating should only be performed under the proper weather conditions.
The recommended air and pavement temperature should be at least 55 degrees Fahrenheit and rising during sealer application and for 8 hours afterward.
Traffic should be kept off a newly sealed surface for a minimum of 18 to 36 hours to allow for drying (curing) time. If this time frame is not practical, We will perform sealcoating in separate mobilizations to maximize convenience. It is also important to refrain from using sprinklers near the area, hosing down, or washing the area for 48 hours before and after work is completed.